Click To Call(904) 664-5908Click To Get A Free Estimate
Screen enclosed pool with a freshly sealed paver deck at a St. Augustine home

A pool deck that drains, grips and holds its color

Pool Deck Paver Sealing in St. Augustine, FL

Call (904) 664-5908 for a free pool deck paver sealing estimate and a reply within 1 business day.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.75 to $3.25 a sq ft to clean, sand and seal
Call Now(904) 664-5908
Pool decks

How soon can a St. Augustine pool deck be sealed?

A local contractor can seal a pool deck anywhere in St. Augustine, FL, and a reply to your request comes within 1 business day, usually much sooner than that. The estimate is free and carries no obligation. To start the conversation, call (904) 664-5908.

Picture the deck after a long wet summer: gray along the shaded edge, dark in the joints where sand has gone and slick near the steps. A sealing job washes the surface, refills the joints and puts a coat on that is meant to shed water and hold the color. To ask about your own deck and lanai, ask for a free estimate.

Call (904) 664-5908

Service area

Is a pool deck outside the city limits covered too?

Yes, the list below runs from the coast to the river and out to the next counties, and each place has its own page. A pool deck in any of them can ask for the same free look. If your street is not named, call (904) 664-5908 and ask.

Wet paver deck beside a lanai pool drying after a wash in St. Augustine
Why choose us

Why does a pool deck need different care than a driveway?

A pool deck stays wet, takes bare feet and soaks up chlorine, so the coat on it works under different stress than a driveway coat. Safe Touch says full sun, pool chlorine and storms can pull a reseal toward two years, which is the short end of its two to three year range. Ask the contractor how a deck near your pool gets planned, and ask for a free estimate.

Water also decides where trouble starts. Jax Pressure Pro, a St. Augustine company, says pavers darken in Florida because the joints hold moisture, and that shade and sprinklers make growth worse. A deck with a shaded corner by the lanai wall often shows green there first. To point out the damp spots on yours, call (904) 664-5908.

Will a sealed pool deck get slippery?

It does not have to. Unilock, a paver maker, says high gloss sealers can look good but turn slippery when wet, while a matte finish keeps traction. A St. Augustine sealing company lists non-slip sealant for pool decks, patios and walkways. Tell the contractor which part of the deck is wet most often, and ask for a free estimate.

Growth is the other slip risk. Coastal Paver Sealing says a sealed surface inhibits the mold and mildew that make pavers slippery, and Florida Man Pressure Washing lists slippery buildup among the warning signs that a deck needs attention. If a step or corner already feels slick, call (904) 664-5908 and say so.

Finish choices around a pool run from matte to semi-gloss and wet look, according to Coastal Paver Sealing. A wet look deepens the color, but near water the safer pick is the one with grip. Ask to see a small sample on a spare spot, since Unilock advises testing a small area first. To set that up, ask for a free estimate.

What happens to my screen enclosure and pool equipment?

A careful contractor protects them before any water flies. One St. Augustine washing company says plants, screens and pool equipment are covered and rinsed, and edges beside landscaping are cleaned by hand at lower pressure. Ask whether your contractor does the same and how the pump and lights are handled. To raise it at the estimate, call (904) 664-5908.

Sealer is a second reason to ask. It goes on in thin coats, and you want it kept out of the pool water and off the cage. Ask how the coat is applied near the coping and how a breeze is handled. To have those answers in writing, ask for a free estimate.

How long does a pool deck take, and does the rain matter?

Paver Sealing Plus lists about two days for a pool deck, weather permitting, and Safe Touch says restoration takes about two days rather than a same-day spray. The deck needs time to dry between the wash and the coat. Unilock says to let it dry longer than seems necessary, because trapped moisture clouds a coat. To plan around your swim schedule, call (904) 664-5908.

St. Augustine gets about 50.6 inches of rain over roughly 118 days a year, according to Wikipedia, and the wet season runs May through October, with August and September near 7.2 inches each. January and February are the driest, near 2.7 inches. Safe Touch names fall as the right season to seal. Ask for a rain date when you ask for a free estimate.

Rain during the cure can reduce how well sealer works, says Unilock, and light foot traffic is often fine the same day while full strength takes longer. Wait on furniture and the grill. A contractor should tell you the exact day the deck is ready. To hear it for your deck, call (904) 664-5908.

Pool deck paver joints filled with new sand before sealer in St. Augustine

How often should a St. Augustine pool deck be resealed?

Plan on two to three years, and expect two if the deck gets full sun all day. Safe Touch calls two to three years typical, and a St. Augustine washing company says sealed pavers are cleaned and resealed on that same schedule. Unilock gives three to five years for pavers in general, and Coastal Paver Sealing says about two to five. A pool deck leans to the short end. To have yours checked, ask for a free estimate.

A simple test helps between visits. When water soaks in instead of beading, or the color looks flat, the coat is worn. Florida Man Pressure Washing lists faded color, missing joint sand and shifting pavers as warning signs. A one to two year wash, as the same washing company suggests, keeps growth from settling in. To book a look, call (904) 664-5908.

Pricing

What does pool deck paver sealing cost in St. Augustine?

No company publishes a pool-deck-only rate for St. Augustine, so the table below uses published pieces: two whole-job figures for decks and the per square foot ranges for clean, sand and seal. Size sets most of the price, and a failed old coat adds to it. To turn this into a number for your deck, ask for a free estimate.

Natural stone costs more than concrete or clay pavers on the one list that separates them. Stripping an old coat costs more too, since Safe Touch says it sits above the base rate and gives no figure. Ask for the strip as its own line. For help reading a quote, call (904) 664-5908.

Pool deck jobPublished or worked figureWhere it comes from
Paver pool deck, whole jobAbout $1,500 to $2,200Paver Sealing Plus, by square footage, about 2 days
Natural stone pool deckAbout $1,800 to $2,600Paver Sealing Plus, for stone such as travertine
Clean, sand and seal, 800 sq ft deck$1,400 to $2,600Safe Touch rate of $1.75 to $3.25 a sq ft, worked on a sample size
Clean, sand and seal, 1,200 sq ft deck with a wide lanai$2,100 to $3,900Same Safe Touch rate applied to a larger deck
Same job at the Coastal Paver Sealing rate$1,200 to $2,400 for 800 sq ftCoastal Paver Sealing, $1.50 to $3.00 a sq ft in Northeast Florida
Stripping a failed old coat firstHigher, no figure publishedSafe Touch says strip and reseal sits above the clean, sand and seal rate

Prices read November 2026 from Paver Sealing Plus, Safe Touch and Coastal Paver Sealing, all Northeast Florida companies. The worked rows are simple multiplication on sample sizes, not a quote. A contractor sets the real price after seeing the deck.

Get a Free Estimate

Should an old pool deck coat be stripped or sealed over?

That depends on what is on it now. Safe Touch strips a failed coat before resealing instead of coating over it, and Unilock links a whitish film to sealing over an incompatible earlier product or to too much sealer. If the last coat is peeling or cloudy, expect a strip line on the quote. Tell the contractor who sealed it last, and ask for a free estimate.

An old coat that is still sound is easier. The deck is washed, the joints are refilled and a fresh coat goes on once it is dry. Safe Touch seals on a dry surface so the sealer does not turn milky. To ask which case yours is, call (904) 664-5908.

What stains and growth show up on a pool deck here?

A St. Augustine washing company lists irrigation rust, leaf tannin, oil and grease, and efflorescence on newer installs, each needing its own treatment. Deep rust may only lighten, not vanish. Oak and magnolia drop leaves that leave tannin marks on shaded lots. To bring photos of the marks on your deck, ask for a free estimate.

Efflorescence is the white film from salts in the concrete. Unilock says it must be cleared and the deck dry before sealing, so the sealer does not lock it in. A sprinkler head that hits the edge every morning can leave rust marks in a line. Mention where your timer points when you call (904) 664-5908.

Photos

What do sealed pool decks look like around St. Augustine?

Freshly sealed brick paver courtyard with a wrought iron gate beside a lanai pool in St. Augustine
Sealed paver pool deck beside a lanai pool in St. Augustine
Sealed paver patio under palms behind a tile roof home beside a lanai pool in St. Augustine
Sealed paver walkway to a front door beside a lanai pool in St. Augustine
Close view of freshly sealed pavers beside a lanai pool in St. Augustine
Paver area with one cleaned half beside a dirty half beside a lanai pool in St. Augustine
Contractor cleaning pavers beside a lanai pool in St. Augustine
Contractor sealing or sanding pavers beside a lanai pool in St. Augustine
How it works

What is the pool deck sealing process, step by step?

Five steps cover most pool deck jobs, from the first look to the walk-through. Order matters, because each step sets up the next. To get your deck on a schedule, call (904) 664-5908.

1. Walk the deck and the pool edge

The contractor looks at the coping, the drains and the spots where water sits, and checks what is on the pavers now. Safe Touch writes quotes after photos or a site look.

2. Cover and protect

A St. Augustine washing company covers and rinses plants, screens and pool equipment before it starts, and it cleans the edges near landscaping by hand at lower pressure.

3. Treat, then wash with a surface cleaner

Rust, tannin and oil get a treatment first. Safe Touch treats a pool deck like concrete and uses a surface cleaner so the finish has no wand stripes.

4. Replace the joint sand

Safe Touch says the old sand is replaced, not reused. Coastal Paver Sealing names polymeric or silica sand for the joints.

5. Let it dry, then seal

The deck dries fully first, since Unilock says to wait longer than seems needed. Thin coats go on, and the contractor tells you when feet and furniture can return.

Questions

What do St. Augustine homeowners ask about pool deck sealing?

Is it good to seal pavers in Florida?

Usually yes, when the color has faded, the joint sand has washed out or green growth keeps returning. Coastal Paver Sealing says sealing guards against stains and oil, slows weeds in the joints and inhibits the mold and mildew that make pavers slippery. It costs a new coat every few years, and it does not fix a deck that has sunk.

Will Dawn dish soap clean pavers?

For ordinary dirt and grime, Unilock, a paver maker, says soap and water do the work, and it names dish soap with water and a stiff plastic brush for the white film called efflorescence. Pool decks also gather rust, leaf stains and old sealer, and those need a treatment picked for the stain. A contractor sorts that out at the estimate.

What not to use to clean pavers?

Unilock says to skip wire brushes, because the bristles can leave metal bits that rust, and to avoid high pressure or a steep spray angle, which can blow the sand out of the joints. A St. Augustine washing company adds that a bare pressure wand can etch pavers and strip color, which is why it uses a surface cleaner.

Is it better to spray or roll paver sealer?

Either tool can lay down a good coat. What Unilock stresses is a thin, even coat on a dry surface, with no second coat until the first has set. Ask the contractor which tool they plan to use around your pool and how they keep sealer out of the water and off the screen.

Can a St. Augustine pool deck be sealed without a slick finish?

Yes. Unilock says high gloss sealers can turn slippery when wet and that a matte finish keeps traction, and a St. Augustine sealing company offers non-slip sealant for pool decks. When you ask for the estimate, ask which finish is planned for the part of the deck that stays wet.

How long does a pool deck sealing job take in St. Augustine?

Paver Sealing Plus, a Northeast Florida company, lists about two days for a pool deck and about one for a driveway, weather permitting. Safe Touch also puts restoration near two days. The deck has to dry between the wash and the coat, so rain can add a day.

Does pool chlorine shorten how long sealer lasts?

It can. Safe Touch calls two to three years typical for pavers in Northeast Florida and says full sun, pool chlorine and storms can pull that toward two. Unilock gives three to five years for pavers in general, so a pool deck belongs near the short end.

Ready to get the pool deck sealed?

Call or send the short form for a free estimate. A reply comes within 1 business day, often the same afternoon.

Call (904) 664-5908

Free, no obligation